- Tham gia
- 02/06/2018
- Bài viết
- 1
How to config Feather Board RPG hiển thị máu bằng Icon?
Vd như v nè
Vd như v nè
C
Hỏi về Plugin How to config Feather Board RPG hiển thị máu bằng Icon?
- Thread starter Concomaudo
- Ngày gửi
- Trạng thái
- Tham gia
- 11/12/2016
- Bài viết
- 99
ké vs 
vvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvv
- Tham gia
- 24/01/2017
- Bài viết
- 23
thử dùng {healthbar} xem
D2K Fake
THÀNH VIÊN
- Tham gia
- 19/07/2017
- Bài viết
- 2,096
hình như t thử r mà k đc @@thử dùng {healthbar} xem
- Tham gia
- 02/08/2017
- Bài viết
- 313
# Default FeatherBoard comes with a board called "default". All players have the permission
# featherboard.group.default (by default) meaning all players should see the scoreboard unless
# the permission is negated.
# Example of the use of settings
# This section is optional
settings:
# If you quickly want to change the
# the label color change it here.
# It replaces $setting_label-color$ throughout the entire config
label-color: "&e"
# Show or hide the health
# This is an example of the script
show-health: true
# Example of pre processing script
# This section is optional
script-pre: |
if (settings['show-health'] == "true"){
board.getMeta().setSetting("enable-health","");
}else{
board.getMeta().setSetting("enable-health","|disabled|");
}
# This section is required. Those are your scoreboard lines
lines:
# Every section here are different lines. The first section will be used as the title
# the following sections will be used as the lines on the scoreboard (max 15)
# Just as the scoreboard names you can name these 'lines' whatever you want. But to make
# things simple I will use logical names such as "title", "spacer", "header", ...
title:
# Every line has its own frames. The animation will loop through these frames on intervals
# that you configure below.
# Put all your frames under 'text:'. You can make as many lines as you want and use
# placeholders and preset effects.
# Keep in mind that there is a limit in line width!
frames:
# To create cool looking animations you create yourself
# you can use the graphical tool AnimationCreator
# www.spigotmc.org
# For all placeholders: www.spigotmc.org
# For all preset effects: www.spigotmc.org
- '<single><delay times="10">&l><</delay></single>'
- '<single>&f&ler</single>' # <single> will allow the frame to only run ONCE
- '<single>&f&lherB</single>'
- '<single>&f&lherBo</single>'
- '<single>&f&latherBoa</single>'
- '<single>&f&leatherBoar</single>'
- ' <delay times="15">&f&lFe&4&l4&f<herBoard</delay>' # <delay> will repeat the line X times
#- '<glow glowsize="5">FeatherBoard</glow>' # This is the basic glow effect without custom colors
- '<glow glowsize="5" startglowcolor="&c&l" glowcolor="&4&l" endglowcolor="&c&l" normalcolor="&f&l">FeatherBoard</glow>'
# Interval is the animation interval in TICKS (20 ticks is one second).
# Every X ticks the animation goes to the next frame (see above)
# Once all frames are finished it will start over from the first one
interval: 2
# If you don't want a static order of the frames and want to show each frame at random
# you can enable this option.
random: false
# A scoreboard is dynamic. The lines can change length due to smaller placeholders or scrolling text.
# that is why it is advised to have something on your scoreboard that is bigger then all other lines.
# These lines (usually a header or footer) are also good for decoration.
header:
frames:
- '<rainbow>&m+---------------------+</rainbow>'
interval: 10
random: true
player-label:
frames:
- '&b&l> $setting_label-color$&lPlayer Info:'
interval: 100
random: false
player-line1:
frames:
- '&o<cmd repeatmiddle="20">{player}</cmd>'
- '&o<cmd repeatmiddle="20">{locale}</cmd>'
interval: 2
random: false
player-line2:
frames:
- '{ping} &7ms latency'
interval: 2
random: false
# For empty lines just add another 'section' but just don't put any text
# in it so it acts like an empty line.
spacer1:
frames: []
interval: 100
random: false
news-info:
frames:
- '&b&l> $setting_label-color$&lNews:'
interval: 100
random: false
news:
# Lets create some animated news
# News is something you need to write quick
# and usually you don't want to spend ages on creating
# some cool effect. That is why FeatherBoard features
# several presets you can use.
frames:
- '<scroll width="29">&cAttention! &7Please do not forget to give this plugin a &e{star_galaxy}{star_galaxy}{star_galaxy}{star_galaxy}{star_galaxy}&7 rating!</scroll>'
interval: 2 # When using preset effects. The interval will apply to that effect
# Do you want to randomize the animation frames?
random: false
# For empty lines just add another 'section' but just don't put any text
# in it so it acts like an empty line.
spacer2:
frames: []
interval: 100
random: false
timesplayed-label: #Switch between site, times played and health
text:
- '&b&l> $setting_label-color$&lSite:'
- '&b&l> $setting_label-color$&lPlayed:'
- '$setting_enable-health$&b&l> $setting_label-color$&lHealth:'
interval: 100
random: false
timesplayed: #Switch between site, times played and health
frames:
- ''
- '{stat_timesplayed}'
- '$setting_enable-health${healthbar}'
interval: 100
random: false
# For empty lines just add another 'section' but just don't put any text
# in it so it acts like an empty line.
spacer3:
frames: []
interval: 100
random: false
server-label:
frames:
- '&b&l> $setting_label-color$&lServer Info:'
interval: 100
random: false
server-line1:
frames:
- '<repeat times=200>{usedram} &7MB &8&l/ &f{totalram} &7MB</repeat>' #Refresh the ram 200 times
- '<repeat times=100>{tps_rounded} &7TPS &7&o(Avg {avgtps_rounded})</repeat>' #Refresh the tps 100 times
interval: 1
random: false
server-line2:
frames:
- '{onlineplayers} &aonline players'
interval: 10
random: false
# This is the same as the header. It is not needed since you already use the header as the longest line
# but it looks cleaner having a footer.
footer:
frames:
- '<rainbow>&m+---------------------+</rainbow>'
interval: 10
random: true
*****Nội dung được bổ sung thêm*****
www.spigotmc.org
# featherboard.group.default (by default) meaning all players should see the scoreboard unless
# the permission is negated.
# Example of the use of settings
# This section is optional
settings:
# If you quickly want to change the
# the label color change it here.
# It replaces $setting_label-color$ throughout the entire config
label-color: "&e"
# Show or hide the health
# This is an example of the script
show-health: true
# Example of pre processing script
# This section is optional
script-pre: |
if (settings['show-health'] == "true"){
board.getMeta().setSetting("enable-health","");
}else{
board.getMeta().setSetting("enable-health","|disabled|");
}
# This section is required. Those are your scoreboard lines
lines:
# Every section here are different lines. The first section will be used as the title
# the following sections will be used as the lines on the scoreboard (max 15)
# Just as the scoreboard names you can name these 'lines' whatever you want. But to make
# things simple I will use logical names such as "title", "spacer", "header", ...
title:
# Every line has its own frames. The animation will loop through these frames on intervals
# that you configure below.
# Put all your frames under 'text:'. You can make as many lines as you want and use
# placeholders and preset effects.
# Keep in mind that there is a limit in line width!
frames:
# To create cool looking animations you create yourself
# you can use the graphical tool AnimationCreator
# www.spigotmc.org
# For all placeholders: www.spigotmc.org
# For all preset effects: www.spigotmc.org
- '<single><delay times="10">&l><</delay></single>'
- '<single>&f&ler</single>' # <single> will allow the frame to only run ONCE
- '<single>&f&lherB</single>'
- '<single>&f&lherBo</single>'
- '<single>&f&latherBoa</single>'
- '<single>&f&leatherBoar</single>'
- ' <delay times="15">&f&lFe&4&l4&f<herBoard</delay>' # <delay> will repeat the line X times
#- '<glow glowsize="5">FeatherBoard</glow>' # This is the basic glow effect without custom colors
- '<glow glowsize="5" startglowcolor="&c&l" glowcolor="&4&l" endglowcolor="&c&l" normalcolor="&f&l">FeatherBoard</glow>'
# Interval is the animation interval in TICKS (20 ticks is one second).
# Every X ticks the animation goes to the next frame (see above)
# Once all frames are finished it will start over from the first one
interval: 2
# If you don't want a static order of the frames and want to show each frame at random
# you can enable this option.
random: false
# A scoreboard is dynamic. The lines can change length due to smaller placeholders or scrolling text.
# that is why it is advised to have something on your scoreboard that is bigger then all other lines.
# These lines (usually a header or footer) are also good for decoration.
header:
frames:
- '<rainbow>&m+---------------------+</rainbow>'
interval: 10
random: true
player-label:
frames:
- '&b&l> $setting_label-color$&lPlayer Info:'
interval: 100
random: false
player-line1:
frames:
- '&o<cmd repeatmiddle="20">{player}</cmd>'
- '&o<cmd repeatmiddle="20">{locale}</cmd>'
interval: 2
random: false
player-line2:
frames:
- '{ping} &7ms latency'
interval: 2
random: false
# For empty lines just add another 'section' but just don't put any text
# in it so it acts like an empty line.
spacer1:
frames: []
interval: 100
random: false
news-info:
frames:
- '&b&l> $setting_label-color$&lNews:'
interval: 100
random: false
news:
# Lets create some animated news
# News is something you need to write quick
# and usually you don't want to spend ages on creating
# some cool effect. That is why FeatherBoard features
# several presets you can use.
frames:
- '<scroll width="29">&cAttention! &7Please do not forget to give this plugin a &e{star_galaxy}{star_galaxy}{star_galaxy}{star_galaxy}{star_galaxy}&7 rating!</scroll>'
interval: 2 # When using preset effects. The interval will apply to that effect
# Do you want to randomize the animation frames?
random: false
# For empty lines just add another 'section' but just don't put any text
# in it so it acts like an empty line.
spacer2:
frames: []
interval: 100
random: false
timesplayed-label: #Switch between site, times played and health
text:
- '&b&l> $setting_label-color$&lSite:'
- '&b&l> $setting_label-color$&lPlayed:'
- '$setting_enable-health$&b&l> $setting_label-color$&lHealth:'
interval: 100
random: false
timesplayed: #Switch between site, times played and health
frames:
- ''
- '{stat_timesplayed}'
- '$setting_enable-health${healthbar}'
interval: 100
random: false
# For empty lines just add another 'section' but just don't put any text
# in it so it acts like an empty line.
spacer3:
frames: []
interval: 100
random: false
server-label:
frames:
- '&b&l> $setting_label-color$&lServer Info:'
interval: 100
random: false
server-line1:
frames:
- '<repeat times=200>{usedram} &7MB &8&l/ &f{totalram} &7MB</repeat>' #Refresh the ram 200 times
- '<repeat times=100>{tps_rounded} &7TPS &7&o(Avg {avgtps_rounded})</repeat>' #Refresh the tps 100 times
interval: 1
random: false
server-line2:
frames:
- '{onlineplayers} &aonline players'
interval: 10
random: false
# This is the same as the header. It is not needed since you already use the header as the longest line
# but it looks cleaner having a footer.
footer:
frames:
- '<rainbow>&m+---------------------+</rainbow>'
interval: 10
random: true
*****Nội dung được bổ sung thêm*****
Nể ông nội này, đi đâu chỉ cũng sai toàn linh tinh. Chỉ thì chỉ đúng 1 phát chắc kèo điđọc ở đây
***Không thể trích nội dung ẩn***
*****Nội dung được bổ sung thêm*****
Hỏi chấm *** thích ?
www.spigotmc.org
>- Trạng thái
Similar content
Most view
Xem thêm
|
Bukkit Bukkit Coding Ep 6 - Cách sử dụng HashMap Save Config (How to HashMap Save Config)
|
|
Đã giải quyết how to config AAC
|
|
Đã giải quyết How to get online player in server on php ?
|
| I |
Hỏi về Minecraft How to fix lỗi [proxy] Lost Connection to server
|
|
Hỏi về server pc how to fix lỗi này MN
|